jororaitchev

And the original model will look like this;
 

I continue with the collection of the cabinet;

Now I can make the exact measurement of the volume. And that's 31.5l, just as much as I need!
Oh, l forget to show you what I did to get that volume!
I maked a filter compartment (for the MW and TW), the W section will be in the box;


I previously make the last layer-10 mm MDF / to get a sandwich construction / on the front panel and the bottom;

Last constructive action ; 
After 10 hours I will install the last layers of 2 x 4 mm bent MDF;
 

A small structural change for the side panels, last layer is 1 x 4 mm plywood and everything is re ady for the measurements.

A small structural change for the side panels, last layer is 1 x 4 mm plywood and everything is re ady for the measurements.

I continue with the collection of the cabinet;

Now I can make the exact measurement of the volume. And that's 31.5l, just as much as I need!
Oh, l forget to show you what I did to get that volume!
I maked a filter compartment (for the MW and TW), the W section will be in the box;


I previously make the last layer-10 mm MDF / to get a sandwich construction / on the front panel and the bottom;

Last constructive action ; 
After 10 hours I will install the last layers of 2 x 4 mm bent MDF;
 

And the original model will look like this;
 

I have an idea to make a new project to in the base there should be two 10" loudspeakers - just an idea. They look like animals, maybe dinosaurs, but important are 20Hz.

Preprocessing of the internal ribbing;
I can now start collecting the cabinet;

 

A small structural change for the side panels, last layer is 1 x 4 mm plywood and everything is re ady for the measurements.

I continue with the collection of the cabinet;

Now I can make the exact measurement of the volume. And that's 31.5l, just as much as I need!
Oh, l forget to show you what I did to get that volume!
I maked a filter compartment (for the MW and TW), the W section will be in the box;


I previously make the last layer-10 mm MDF / to get a sandwich construction / on the front panel and the bottom;

Last constructive action ; 
After 10 hours I will install the last layers of 2 x 4 mm bent MDF;
 

I continue with the collection of the cabinet;

Now I can make the exact measurement of the volume. And that's 31.5l, just as much as I need!
Oh, l forget to show you what I did to get that volume!
I maked a filter compartment (for the MW and TW), the W section will be in the box;


I previously make the last layer-10 mm MDF / to get a sandwich construction / on the front panel and the bottom;

Last constructive action ; 
After 10 hours I will install the last layers of 2 x 4 mm bent MDF;
 

I continue with the collection of the cabinet;

Now I can make the exact measurement of the volume. And that's 31.5l, just as much as I need!
Oh, l forget to show you what I did to get that volume!
I maked a filter compartment (for the MW and TW), the W section will be in the box;


I previously make the last layer-10 mm MDF / to get a sandwich construction / on the front panel and the bottom;

Last constructive action ; 
After 10 hours I will install the last layers of 2 x 4 mm bent MDF;
 

I have an idea to make a new project to in the base there should be two 10" loudspeakers - just an idea. They look like animals, maybe dinosaurs, but important are 20Hz.

I have an idea to make a new project to in the base there should be two 10" loudspeakers - just an idea. They look like animals, maybe dinosaurs, but important are 20Hz.

Preprocessing of the internal ribbing;
I can now start collecting the cabinet;

 

I'm 57 years old and I have the answer is simple, I have a problem with my ego, but also with alcohol, my "beloved" state and the fact that I was not born in other latitudes.

An interesting situation, nobody asked me what happened to the column volume in such ventilation! How will we calculate the volume/ have st losses/ in this complex form of ventilation?

Do not forget acoustics ....

A nod to "B & W"

Pay attention to the most important tool-panel behind /my job - I  must finish her -  never ever!/.
 

Добро вече !
Живимо у глобалном свету, нема велика изненађења у информације.
These columns have their new  owner and I work on a new project.
To move the evening!
I decided to move my evening as you presented
my new project:

Well, a more foil...

Hello,
the first project of my DIY loudspeakers i have served Ti6k- JBL. My first contact with
them, was in distant 2005.
I started working with them in 2009 and finished in 2012.
The loudspeakers are "SEAS"- Excel / Tw-1”, Mw-5”for center 2х 5.5”,Bass-8,5”/ and cross-over parts- "Intertechnik".
Have are some pictures, if there is interest, i will continue.
Regards!