ZM, random zanimacije

[zerowaf]

pre 6 časa, LightMatic reče

Podsjeti me na vic: Razgovaraju dvije "perse mostarske" preko telefona. -Jaoooo, moja ti, kako mi je danas ispala torta. -De mi pričaj, moja ti, jel' bila čemu? -Ma, šuti, tri sata sam je strugala sa tepiha.  

Ja bukvalni bukvan kakav jesam, sam tri puta čitao i razmišljao da nedostaje kraj vica ne shvaćajući da sam riječ "ispala" stvarno i shvatio doslovno - "ispala joj je" odnosno "pala je" umjesto prenešeno, tj. u formi izraza "dobro je ispalo". 
Def nisam Einstein...ni Zweistein. Mozda Dreistein.....

[Zen Mod]

[Zen Mod]

 

[zerowaf]

pre 2 časa, Zen Mod reče

 

Kliknujo sam na video, a da nisam ni pročitao naslov i čujem glas.....kroz glavu mi je proletjelo: "He's back!"  
Idem sad nastaviti s gledanjem. Još sam na panorami pročelja kuće. 

[zerowaf]

Pogledao do kraja!
Kakav video! Kakav čovjek!
Nadam se da će ostati zdrav koliko god može i da možda pronađe nešto za lemljenje što mu neće škoditi.
Nego, njegovo pitanje na kraju, kao da mi zvoni da jesam negdje vidio ili čuo za feritni prsten na B+ vodu, ali možda je to bilo tek neko jalovo pisanje tko zna gdje na netu.

[Zen Mod]

feritni prsteni se stavljaju/primenljivi na sve vodove kuda moze da udje djubre u kolo

mada, ja bih to stavio i nekim operatorima opreme, na sredstvo za disanje

 

[Zen Mod]

 

[Zen Mod]

https://www.diyaudio.com/community/threads/tatanka-se-and-balanced-preamps-presentation.430799/post-8394742

 

Quote

time is everchanging category in ZM's Universe ......
it seems all problems solved, and I have some conclusions how to even more perfect/poslish/optimize some important fragments

anyhow, it sings; proof of concept, surplus cases I'm collecting exactly for this purposes; pcbs made exactly fot this approach, but evident parts I'm using just because I have them - say in/out connectors are certainly not intended ones

bottom case:
TFT and logic
heater regs
logic regs
regs for negative rail
CCS parts of high and low rail shunt regs
I was thinking to multiplex/demultiplex relay lines, to avoid using flat cables and simply add another multipin aviation thingie ..... but abandoned that option from one important reason - hard to maintain make--before-break switching characteristic, when introducing multiplex; bummer

two upper cases:
selector relays on input pcbs optimized for Neutrik pcb pin XLRs and neutrik cup RCAs
pcb with tube-mos compound buffers, and shunt part of high and low rail shunt regs
out pcb optimized for Neutrik pcb pin XLRs and neutrik cup RCAs, mute relay too

rest visible on pics

final arrangement is in 3* 2U/280 Modushop Slim line, steel covers, using base plates; that (base plates) will allow significantly neater wiring, besides additional magnetic decouple between bottom box and signal carrying boxes

reminder - Tatanka (Bal) .......all that trouble because negative phase AVC winding is practically floating when SE input is engaged and bal output is used ..... and hum is creeping in through all possible and impossible tiny cracks in AVC environment

 

 

[Zen Mod]

[Leonardo]

     

[Zen Mod]

tnx Leo

vec mogu da zamislim 1mm oko kako svekli plavo

 

[Leonardo]

 

Meni se baš sviđaju ove tvoje  Junkyard prednjice, svaka nova makina je unikat.  Nema tu mesta za bafala sa plavim okom.