Few my DIY projects

[jororaitchev]

15 minutes ago, jororaitchev said:

 

16 minutes ago, jororaitchev said:

 

 

16 minutes ago, jororaitchev said:

 

17 minutes ago, jororaitchev said:

 

 

19 minutes ago, jororaitchev said:

Without the shells, the basics, and the end caps, everything else has to be restarted.

 

 

 

 

[Trotter]

Ovaj pije vise od nas trojice u Peckhamu...

 

Sent from my SM-G361F using Tapatalk

 

 

[jororaitchev]

10 minutes ago, Trotter said:

Ovaj pije vise od nas trojice u Peckhamu...

 

Sent from my SM-G361F using Tapatalk

 

 

I'm sorry, some total trickery with my the server and the internet!

My brandy is 50 degrees, but it's not the problem.

[prophet]

Mine is 55[emoji3]

[Aleks]

Finish the speakers until September the 30th and bring 'em over here to diyaudio fest.

There'll be some nice brandy - for sure - and fried trout, barbeque, and a lot of good sound

[jororaitchev]

16 minutes ago, Alex said:

Finish the speakers until September the 30th and bring 'em over here to diyaudio fest.

There'll be some nice brandy - for sure - and fried trout, barbeque, and a lot of good sound

I will certainly do so on this date, but I have not specified which year will be .

[jororaitchev]

Preprocessing of the internal ribbing;

I can now start collecting the cabinet;

 

[jororaitchev]

I have an idea to make a new project to in the base there should be two 10" loudspeakers - just an idea. They look like animals, maybe dinosaurs, but important are 20Hz.

[jororaitchev]

On 4.08.2017 г. at 9:05 PM, jororaitchev said:

I have an idea to make a new project to in the base there should be two 10" loudspeakers - just an idea. They look like animals, maybe dinosaurs, but important are 20Hz.

And the original model will look like this;

 

[jororaitchev]

I continue with the collection of the cabinet;

Now I can make the exact measurement of the volume. And that's 31.5l, just as much as I need!
Oh, l forget to show you what I did to get that volume!
I maked a filter compartment (for the MW and TW), the W section will be in the box;

I previously make the last layer-10 mm MDF / to get a sandwich construction / on the front panel and the bottom;

Last constructive action ; 
After 10 hours I will install the last layers of 2 x 4 mm bent MDF;

 

[jororaitchev]

A small structural change for the side panels, last layer is 1 x 4 mm plywood and everything is re ady for the measurements.

[jororaitchev]

And a risky picture (everything is supported by gravity), how look for compared to the front speakers, are not on one line, but I rely on your imagination.

 

[black coffe]

23 hours ago, jororaitchev said:

And a risky picture (everything is supported by gravity), how look for compared to the front speakers, are not on one line, but I rely on your imagination.

 

Nhf , stalak je kvalitetan , al  meni estetski nije nešto  lijepo .

[Dacho]

Mozda ovako da je deblja noga kao slovenci sto rade...

[jororaitchev]

2 hours ago, black coffe said:

Nhf , stalak je kvalitetan , al  meni estetski nije nešto  lijepo .

Relax , there is a lot of work still on the stand!
Similar was the situation with the bases of the central pillars;

 

 

[jororaitchev]

Quote:   Početnik 

"Mozda ovako da je deblja noga kao slovenci sto rade..."

 

Such a design- never!They look like cut trees in the park.

Massive wood for speakers - a very bad idea!

[black coffe]

On 01.09.2017. at 8:53 AM, Dacho said:

Mozda ovako da je deblja noga kao slovenci sto rade...

Je ! onaj je mal ko roda il čaplja . Ne velim za kvalitetu ? 

 

[black coffe]

On 01.09.2017. at 8:53 AM, Dacho said:

Mozda ovako da je deblja noga kao slovenci sto rade...

E stari moj ! sad celo "selo" mudrijaša tipa rezonancije sim pa tam ne more imat prigovora : 

[ZZZ]

21 hours ago, jororaitchev said:

Quote:   Početnik 

"Mozda ovako da je deblja noga kao slovenci sto rade..."

 

Such a design- never!They look like cut trees in the park.

Massive wood for speakers - a very bad idea!

And how Your design look a like? Is there any sense, relationships, or it is totaly arbitary without any design at all?

At least they, slovenans, dont hide natural, true wood.

Tremendous amount of handy work does not guaranties the well soud. The goal is to impress the potential buyer at the first second and sell as soon as possible.

Your "design" is wrong, your measurements with a water is wrong, that is not the real volume drivers deserves.

with these numerous chambers you divide total volumes into milion small chambers. every one have own center of mass.

these center of masses are farr from each other and form much smaller volume driver can see than measure simple volume.

But You are unable to understand this.

That is all try to find on this forum measurements and resuls that one member did with and without chambers. He cut out "bracing"

and report....

cheers

 

[jororaitchev]

^  Very impressive speech!
It is filled with deep knowledge - from mathematics to marketing.
Thank you very much, I even realized that myself I is made in the wrong way!

[Dacho]

23 hours ago, jororaitchev said:

 

Massive wood for speakers - a very bad idea!

Nebih se bas slozio sa ovim. Dokazano je mnogo puta da se do kvalitetnog zvuka ne dolazi samo metodom upotrebe mrtvog materijala za izradu zvucnih kutija. Nekada to zna biti kontraproduktivno pogotovo sa upotrebom medijapana. On zna nekada unistiti svu zivost glazbe.

[Dacho]

2 hours ago, black coffe said:

E stari moj ! sad celo "selo" mudrijaša tipa rezonancije sim pa tam ne more imat prigovora : 

Kud ćeš boljeg stalka od panja poštenog bagrema ili hrasta..