Mikorist Napisano Avgust 21, 2019 Share #815 Napisano Avgust 21, 2019 Mada imaju ove (nove) verzije za foobar - (koje) treba tek da probam https://sourceforge.net/projects/foobar2000-wasap2-output/ Quote Choosing either the ASIO output or the WASAPI output depends on your audio device capabilities. ASIO output should be preferred if your audio device provides a native ASIO driver, because for the time being, last enhancements related to sample cache management and use of advanced instructions set have been implemented in the ASIO2 plugin only. Requirements these components have been built with foobar2000 v1.3 SDK. they are compatible with foobar2000 1.3+ but not with earlier versions. foo_out_wasap2.dll and foo_out_asio2.dll are compatible with Windows 7, 8 & 10. (foo_out_wasap2_W7.dll and foo_out_asio2_W7.dll delivered in previous versions are now useless and will not be delivered anymore) tested with Windows 7 and 10, but it should work with windows 8.x. Wasapi component tested with Lynx AES 16e and Realtek audio drivers. but it should work with any Wasapi compliant drivers supporting event-driven mode. Asio component tested with Lynx AES 16e Asio driver, Jplay and Asio4all Asio wrappers. Installation Extract the downloaded archive and place foo_out_xxx.dll (or foo_out_xxx_W7.dll if your environment is Windows 7) in your foobar2000 "components" folder (normally located at %ProgramFiles%\foobar2000\components\). Start foobar2000. Open up Preferences, navigate to Playback -> Output. In order to use a Wasapi output, configure foo_out_wasap2.dll (or foo_out_wasap2_W7.dll) component: Select the output component prefixed with WASAP2 which corresponds to your output device in the Device drop-down list Select the bit depth in the Output format drop-down list: use 32 bit depth if your sound card supports it. Click Apply. In order to use a Asio output, configure foo_out_asio2.dll (or foo_out_asio2_W7.dll) component: Select the output component prefixed with ASIO2 which corresponds to your output device in the Device drop-down list Click Apply. The component is now ready to play. Advanced configuration may be necessary to improve sound quality. see Advanced configuration parameters description below. Advanced configuration Open up Preferences, then navigate to Advanced -> Playback -> WASAP2 in order to configure the Wasapi component, or navigate to Advanced -> Playback -> ASIO2 in order to configure the Asio component. Most parameters are common to both types of component. parameter name default description output type (Asio, Wasapi, both) Component Config Enable digital volume control enabled If enabled, volume level changes in foobar2000 are relative to the master hardware volume. If disabled, changing volume level in foobar changes also master hardware volume Wasapi only Enable Visualisation (Spectrum,Peak meter...) enabled Disabling visualization goodies decreases memory management activity, which can results in improved SQ Both Invert Absolute phase by default if set disabled For the guys who believe like me in the benefits of the absolute phase tuning: If set, absolute phase is inverted by default. In order to play a track with a phase different from the default, associate a phase tag to the track and set its value to "0" (use default) or "1" (invert default). the name of the phase tag can be defined below. Both Invert Tag name empty Define here the name of the phase tag used by the WASAP2 output component to change the absolute phase on the fly when playing the track. Both Use SIMD instructions (optim.) enabled When enabled, the component uses SIMD instructions to improve performance, and, in consequence, reduce latency. this parameter may be disabled when SIMD instructions set are not supported by the hardware. Wasapi only Use AVX/AVX2 instructions enabled When enabled, the component uses AVX/AVX2 instructions to improve performance, when supported by the processor (e.g. 4th generation of Intel core I3, I5, I7 or more recent ones). this parameter may be disabled for backward compatibility if for any reason you encountered problems with AVX. Both Use Chunk alignment Optimization enabled When enabled, the component use an optimized code path when foobar chunk size is aligned on endpoint buffer size. It is preferrable to disable it explicitly when using upsampling DSP, because foobar chunk size changes continuously when using this type of DSP. Asio only Bypass clipping (optim. when SSE41 not supported) disabled This parameter may be enabled to improve performance, and, in consequence, reduce latency, when SSSE3 instruction set is supported, but not SSE41. In order to know which SSE are supported by your hardware, play a track with WASAP2 trace level set to "1" and check the foobar2000 console output (at the very beginning). Please note that enabling this optimisation is discouraged when clipping is necessary , typically when using some types of dsp. Both Use MMCSS for the Sample Provider callback enabled Associates a Multimedia Class Scheduler Service (MMCSS) class with the thread in charge of providing samples to the playback device. This class defines how the thread is scheduled by Windows in relation to the global operating system activity. Wasapi only MMCSS mode of the Sample Provider callback Pro Audio defines the name of the MMCSS class associated with the thread in charge of providing samples to the playback device. Use "Pro Audio" if your computer is dedicated to audio. Other possible values are "Audio", "Playback", "Games"...more info here : Multimedia Class Scheduler Service Wasapi only MMCSS base priority (0-7) of the Sample Provider callback 0 defines the base priority of the thread in charge of providing samples to the playback device. Wasapi only Disable DWM MMCSS 0 When set (default), the Desktop Windows Manager doesn't participate in the Multimedia Class Scheduling Service (MMCSS) scheduling algorithm during playback: disabling DWM participation to MMCSS can improve playback rendering at very low latencies. Asio only Sample cache size (samples) for [0Khz - 44,1Khz] tracks 0 (automatic config) Defines the size of the audio samples cache, in samples, for [0Khz - 44,1Khz] sample rate range tracks. When set to 0, the cache size is set automatically to the minimum possible value, in regard to the endpoint buffer size and the input audio chunk size. It can be necessary to increase the value when too much sample shortages occurs, or for a better SQ: see tuning tips below. Both Sample cache size (samples) for ]44,1Khz - 48Khz] tracks 0 (automatic config) Same as above, but for ]44,1Khz - 48Khz] sample rate range tracks. Both Sample cache size (samples) for ]48Khz - 96Khz] tracks 0 (automatic config) Same as above, but for ]48Khz - 96Khz] sample rate range tracks. Both Sample cache size (samples) for ]96Khz - 384Khz] tracks 0 (automatic config) Same as above, but for ]96Khz - 384Khz] sample rate range tracks. Both Trace Level (0-1) 0 When set to "1", trace messages are printed to the foobar2000 console. These messages are useful when changing other configuration parameters, in order to check the correct behaviour of the component after the change: see tuning tips below. Both Driver Endpoint Config Endpoint buffer size (samples) for [0Khz - 44,1Khz] tracks 0 (automatic config) Defines the size of the Wasapi or Asio endpoint buffer, in samples, for [0Khz - 44,1Khz] sample rate range tracks. When set to 0, the buffer size is set automatically either to the minimum possible value, for the Wasapi output, or to the preferred value returned by the device Asio API for the Asio output (Note that sometimes you may need to set this parameter explicitely, instead of keeping the default, because it may happens that some asio drivers don't return a preferred buffer size).IMPORTANT: For the better SQ,it may be useful to configure larger buffer size for higher input sample rates. see tuning tips below. Both Endpoint buffer size (samples) for ]44,1Khz - 48Khz] tracks 0 (automatic config) Same as above, but for ]44,1Khz - 48Khz] sample rate range tracks. Both Endpoint buffer size (samples) for ]48Khz - 96Khz] tracks 0 (automatic config) Same as above, but for ]48Khz - 96Khz] sample rate range tracks. Both Endpoint buffer size (samples) for ]96Khz - 384Khz] tracks 0 (automatic config) Same as above, but for ]96Khz - 384Khz] sample rate range tracks. Both Tuning Tips Tune firstly the endpoint buffer size and set the sample cache size accordingly, sample rate per sample rate, then finally, set/unset the other parameters : SIMD support, foobar visualization. Ima da rodim mečku dok ispodešavam sve ovo dejanco32 and Lemić je reagovao/la na ovo 1 1 Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 22, 2019 Share #816 Napisano Avgust 22, 2019 11 hours ago, Mikorist said: Kod mene je WASAPI pobedio ASIO . povlačim reč - lik koji je modifikovao - preradio ASIO za foobar2000 - u ASIO2 je luuuuud. skine se odavde ASIO2 i ubaci u komponente fooobar https://sourceforge.net/projects/foobar2000-wasap2-output/files/foo_out_wasap2-asio2_1.1-beta2.zip/download podešavanja treba da su ovakva skine se komponenta odavle i instalira https://www.foobar2000.org/components/view/foo_out_asio ovaj ASIO2 - nema veze ni sa fabričkim sa DAC - a ni sa originalnim Didier Galardon je pobedio - među opcijama - ima čak opcija da se sluša u kontrafazi - nema potrebe da se na zvučnicima okreće polaritet. U opciji invert phase - ubaci se - PHASE - vozi postoji podešavanje bafera za svaku frekfenciju - od 0 - 384Khz opcija da se isključe kerefeke - peak metri i slično - još više da se smanji latencija AVX-AVX2 instrukcije za Intel procesore - da sve direkt preko kernela ide u procesor dejanco32 and Lemić je reagovao/la na ovo 1 1 Link to comment Podeli na ovim sajtovima More sharing options...
crni. Napisano Avgust 22, 2019 Share #817 Napisano Avgust 22, 2019 čima ja vidim upozorenje da sve radim na sopstvenu odgovornost, mene to odbija Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 22, 2019 Share #818 Napisano Avgust 22, 2019 Pa na sopstvenu odgovornost se zasniva ceo hi fi. A mogu ti reći da na sopstvenu odgovornost - ovo najprirodnije svira do sad. Oni koji će doći da čuju ovo - doolaze na sopstvenu odgovornost. Lemić je reagovao/la na ovo 1 Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #819 Napisano Avgust 23, 2019 Još neki detalji o WES7 Quote An embedded system is a controller with a dedicated function within a larger mechanical or electrical system, often with real-time computing constraints Prevedeno Ugrađeni sistem (engl. embedded system) je računarski sistem posebne namene, koji je potpuno inkapsuliran uređajem koga nadzire. Ugrađeni sistem ima posebne zahteve i izvršava unapried određene zadatke, za razliku od (PC) ličnog računara opšte namene. I programiran za posebnu primenu.Ovo omogućava arhitekturi embedded sistema da bude namerno pojednostavljen u odnosu na opšte-namenski kompjuter.Embedded sistemi se nalaze u mašinama od kojih se očekuje dugogodišnji rad bez grešaka. Quote Windows Embedded Standard 7 (WES7) is based on the same kernel and is the componentized version of Microsoft Windows 7. In fact, both Operating Systems are based on the same binaries. WES7 is enhanced with special tools to target the needs of embedded systems that run continuously. While a desktop OS like Windows 7 is optimized for maximum user interaction, an embedded OS is the opposite. Embedded systems often run in environments where few user interactions are desired. Embedded systems often supervise safety critical facilities and thus need to be very robust, reliable and autonomous. This user manual covers some tools and techniques that help to reduce possible software and hardware breakdowns concerning the operation of Windows Embedded Standard 7 on an IPC in an industrial environment. It details some embedded features that can be configured. Basic knowledge of Windows operating systems is required. Quote Windows Embedded Standard 7 gives some features to improve the reliability of the system. These features are the Enhanced Write Filter (EWF) and the File-Based Write Filter (FBWF). Both filters improve the stability and prevent system crashes during power fail situations. The EWF is installed on the drive C: and the FBWF is installed on drive D:. Both are disabled by default. This filter is designed to protect a whole partition on sector level and provide the ability to write-protect a run-time image by redirecting all write requests to an overlay located in RAM. For the user the drive appears as a regular drive and allows all write operations. But after reboot all the operations are being set back to the last defined state. Like this the embedded system will always behave the same. Remark: EWF is configured using RAM Reg Mode. To disable the EWF use the CommitAndDisable command or the Icon available on the desktop. Some helpful commands: Ewfmgr Shows the status of the EWF EWFmgr c: /enable Enables the EWF Filter after the next restart Ewfmgr c: /CommitAndDisable Disables the EWF Filter and applies the actual changes to the drive. Ewfmgr c: / commit Applies the currently made changes to the disk by the next restart. Problem je instalirati ga na PC opšte namene. Pravi pain in the ass Mora pomoću trikova da se instalira - preko Windows 7PE - kroz posebnu aplikaciju - koja će forsirano da ga instalira na običan PC na HDD Tako da pojma nemam da li ga neko koristi za audio sem ja Lemić je reagovao/la na ovo 1 Link to comment Podeli na ovim sajtovima More sharing options...
Zen Mod Napisano Avgust 23, 2019 Share #820 Napisano Avgust 23, 2019 moze li to u dual boot sa obicnim W7? Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #821 Napisano Avgust 23, 2019 Naravno da može. Napraviš particiju posebnu - tipa 50GB. Sve particije treba da su MBR. Formatiraš u NTFS. Pokreneš onaj ISO - instaliran na USB. Uputstvo kako se instalira je na nekoj od predhodnih strana. Meni radi uporedo MacOS , Windows Embedded Standard 7 , Debian Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #822 Napisano Avgust 23, 2019 Rekao bih po brzini kako radi da je najsličniji Windows 98 SE..... Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #823 Napisano Avgust 23, 2019 Može i bez butabilnog medijuma da se instalira. Napisaću posebno uputsvo za to i okačiti na naš server potrebno Link to comment Podeli na ovim sajtovima More sharing options...
ninja Napisano Avgust 23, 2019 Share #824 Napisano Avgust 23, 2019 Miko, je li moze streaming da se uključi u takvoj postavci? Za TIDAL i sl. Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #825 Napisano Avgust 23, 2019 Može šta god hoćeš. Nema ograničenja. Treba samo drajvere za mrežnu da instaliraš. ninja je reagovao/la na ovo 1 Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #826 Napisano Avgust 23, 2019 Evo ovako..... Ovde se nalazi sve potrebno ko već radi po WIN okruženjem. https://www.diyaudio.rs/WES7.zip Ja sam po MacOs koristio poseban programčić - da bih napravio NTFS i ceo disk (sve particije) iz GPT prebacio u MBR. Za Windows preporučujem Paragon free - https://www.paragon-software.com/free/pm-express/ Kad se skine ono gore i unzipuje na Desktop vidi se sledeće U ova 4 foldera je sve što je potrebno bez obzira da li je 64bit ili 32bit mašina - za obe imaju njihove verzije. Windows aktivator za ovu verziju ne postoji - aktivira ga serial koji je gore u folderu 1. Nijedan aktivator - čak ni DAZ - ga ne prepoznaje kao Windows. Setup će tražiti - serial - i kad se ubaci gornji permanentno je aktiviran. Nisam instalirao nikakav apdejt niti izlazio van na internet peko njega .... pa nemam pojma da li je i u tom slučaju doživotno aktiviran..... Kad se uđe u folder br 2 u njemu je WinNTSetup - preko koga se forsirano instalira na bilo koju prepoznatu particiju. Izabere se iz programa koji vam treba 64bit ili 32bit - Install.esd (nije kao wim) potom se vidi sledeće. Izabere se lokacija buutdrajva i instalacijonog drajva da bude ista - C, D koji god ste namenili za ovog mališana. Štiklira se Patch Ux Theme - sa ovim može bilo koja neoficijalna tema da se instalira. Ja inače koristim običnu temu NT - najprostiju - jer i ona smanjuje latenciju.... Potom se klikne na Tweaks i sve štiklira. Posle toga klikne na Setup - i ovaj program će da ga raspakuje tamo. Da bi se nastavio SETUP - mora da se restartuje - i butuje baš ta particija. Negde na kraju posle drugog restarta tražiće serial.... To je sve ukratko. Preporučujem da sve drajvere poskidate unapred i pripremite ih za ovo. Ili koristite Double Driver da ubrzate proces http://boozet.id/download/dd410.zip Ja lično na toj particiji uoppšte ne koristim mrežnu ni Wi-Fi - dizejblovao sam ih. I to smanjuje latenciju. Pa da bi izlazio na NET - stalno restartujem mašinu i ulazim u drugi OS Ko hoće dodatno može da pokrene skriptu koja dodatno skida neke stvari - još više ubrzava procese za AUDIO. Nju treba pokrenuti poslednju - kad narihtate sve drajvere - sve programe potrebne.... Zove se Opotimizacija.cmd Da se sve vrati natrag skripta je Original.cmd I to bi bilo to - ukratko Optimizacija.cmd Original.cmd p.s. Nemojte da se uplašite ako u Windows feauteres listi - on or off- nema NIŠTA. I nema ništa u njoj bukvalno... dejanco32, Lemić, zeljko_v and 1 član je reagovao/la na ovo 3 1 Link to comment Podeli na ovim sajtovima More sharing options...
Nesic Napisano Avgust 23, 2019 Share #827 Napisano Avgust 23, 2019 Hvala za ovo Miko. Fidelizer više nije pozreban nakon tvoje skripte? Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #828 Napisano Avgust 23, 2019 Nema svrhe. Jer jedina operacija koja postoji posle ovog u sistemu je fooobar - i ona je u real time Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #829 Napisano Avgust 23, 2019 Ima još svežiji WES7 - iz 2017 . Skidam - pa ću da zamenim gore - nove verzije install.wim (ili esd ) dejanco32 je reagovao/la na ovo 1 Link to comment Podeli na ovim sajtovima More sharing options...
pakonja Napisano Avgust 23, 2019 Share #830 Napisano Avgust 23, 2019 Odlican posao... svaka cast @Mikorist... Nisam jos probao, ali sve sto si radio je smisleno i siguran sam da ovako podesen sistem ne moze da bude losiji za audio nego standardna instalacija windows-a... Imam neki stari racunar koji je i ovako preslab za win10 tako da ce za ovo biti taman.... nadam se da cu imati vremena da za vikend isprobam... javljam utiske... Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #831 Napisano Avgust 23, 2019 Ovo što sad skidam nije standard - već kompakt https://en.wikipedia.org/wiki/Windows_Embedded_Compact_7 nemam ideju kako - i da li će da radi kroz ono gore. Standard ima standardni NT kernel - Compact hibridni. Windows CE conforms to the definition of a real-time operating system, with a deterministic interrupt latency. Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #832 Napisano Avgust 23, 2019 57 minutes ago, Mikorist said: nemam ideju kako - i da li će da radi kroz ono gore. Neče da može - nema nikakav wim ili esd... evo ih ovde ovi naši https://the-eye.eu/public/MSDN/Windows Embedded Standard 7/ al im treba 100 godina da se skinu Link to comment Podeli na ovim sajtovima More sharing options...
Zen Mod Napisano Avgust 23, 2019 Share #833 Napisano Avgust 23, 2019 wow,koji linak Mikume! Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #834 Napisano Avgust 23, 2019 3 minutes ago, Zen Mod said: wow,koji linak Mikume! nema šta nema tamo Link to comment Podeli na ovim sajtovima More sharing options...
pakonja Napisano Avgust 23, 2019 Share #835 Napisano Avgust 23, 2019 Hmm... obratiti paznju... Windows Defender... mozda je false ali..... neka proba jos neko... Link to comment Podeli na ovim sajtovima More sharing options...
Mikorist Napisano Avgust 23, 2019 Share #836 Napisano Avgust 23, 2019 47 minutes ago, pakonja said: Hmm... obratiti paznju... Windows Defender... mozda je false ali..... neka proba jos neko... To je skinuto sa reboot.pro Skinuo sam sad sa msfn.org WinNTSetup i zamenio te fajlove sve. I uploadovao ponovo. Meni Avast pod MacOs nista ne kaze. Sad skeniram i WIndows na drugoj particiji. Javim rezultat Link to comment Podeli na ovim sajtovima More sharing options...
Preporučeni Komentari
Kreiraj nalog ili se prijavi da daš komentar
Potrebno je da budeš član DiyAudio.rs-a da bi ostavio komentar
Kreiraj nalog
Prijavite se za novi nalog na DiyAudio.rs zajednici. Jednostavno je!
Registruj novi nalogPrijavi se
Već imaš nalog? Prijavi se ovde
Prijavi se odmah