stein

Ko će ga znati, Italijani rade svašta (Sonus Faber)...

khm...Šta da kažem, hvala svima koji su mi svojim strpljenjem i čeličnim živcima pomogli da ovo dovedem do faze da svira. no noise, hiss or anything that shouldn't be present. Works. In the days that follow, will do some comparative listening, the SS alone vs tubelizerized amp...

Oh no! Can't find the timer for the power amp transformer

Connected to the main amp modules, turned on, heating on, HT on... Funny, no smoke... Now to get sufficient courage to turn the SS section on...

Yup.In about a minute or ten (need to chop some heating wood first) I'll turn on the switch and see what will burn or explode

was spending my time in the doldrumsI was caught in a cauldron of hateI felt persecuted and paralysedI thought that everything else would just waitWhile you are wasting your time on your enemiesEngulfed in a fever of spiteBeyond your tunnel vision reality fadesLike shadows into the nightTo martyr yourself to cautionIs not going to help at allbecause there'll be no safety in numbersWhen the right one walks out of the doorCan you see your days blighted by darkness?Is it true you beat your fists on the floor?Stuck in a world of isolationWhile the ivy grows over the doorSo I open my door to my enemiesAnd I ask could we wipe the slate cleanBut they tell me to please go fuck myselfYou know you just can't win

Idem da privrnem 3D prednju ploču na 3D pojačalo...

Nijesam mjerio, no samo prineo otvoru kutije za 165mm bas. Premalo, ga ima za pokrit rupu. Paušalno, prva sledeća manja mjera je 130. 127 mm od sredine do sredine centratora membrane (gume) a sveukupno na užem delu korpe 165. Raspon rupa za vijke 175mm od centra do centra rupe. Ne pada mi na pamet sklapati fabričko-ćoškastu kutiju. Ako budem šta radio, biće to nešto estetski drugačije, verovatno skupo i komplikovano... vako: ili vako:

Nemojte se čuditi ako se ovako šta ubrzo nađe u ponudi "za jedan dinar" ...

Nisu, ovi su novi, nikada montirani. A ako si mislio na to da su isti tip, model, serija, e, to već ne bih znao. Uostalom, nije ni bitno. Svakako ne nađem ništa gde bih imao karakteristike pa bar neka bazična matematika da se odradi.

Done. Seems to be all ok, now some minor adjustments, packing into the box and connecting with the power amp stage...

It's all without tubes... Tubes will fall in, once the circuit becomes to be reliable to use. Have a solution, in a couple of hours, it should be done. Thanks to almighty Elccsompliccsadoreccs...

Hoćeš reći da su Elektrostatici kao moji (uski a visoki) na dobrom putu da budu upotrebljivi za ovu namenu? Whooo-Hooo!

Bio u radnji. Bilo 4 komada Nixi cevke, Ei, prodato u međuvremenu. Sorry.

Nemoj ovako rano ujutru da te šaljem po pivo!

Kako se nismo ranije setili ovoga, a sve je bilo dostupno...

I need to figure how the 80VDC appears on the cathode of one triode, not on the other, and the more important question, should it? My guess is that voltage comes across 3u/150k, but how come it doesn't on the other side? As said, took everything apart and made it from scratch, from new parts, on new boards, still have a problem on one side of ECC88... This time I was more than careful and connected exactly everything as it is on the diagram...

Anyway, or whatever, took everything apart and did some thinking. Took new PCBs, new semiconductors and most of the resistors and started from scratch. Now it's all populated and measured, at least as far as voltages go. As I was more than just careful, I can't figure one point where the two triodes (same tube, different channels) behave in a different way. On the drain of Q2 I get around 80VDC on one side, and nothing on the other side. Guess today is a new day and after a good sleep, I'll be less tired than now... No tubes were hurt or injured during this...

about what?

Odem ja sutra do dućana pa vidim. Možda i kupim par komada da ne čekamo da prođu praznici, ima još zainteresovanih. Kada ih donesem kući, pravim fotke pa kome treba, treba. Neću propasti za koju stotku dinara.

That would be about 10.000 words in a nutshell... Go figure...

Podnožja (noval) za šasiju ili za pločicu?

Ja sam baš pre neki dan pitao Zena jel' mu treba. Ove su Ei, noval podnožje, jel' ti to radi posao? Ima kod nas u radnji, mislim da su 100din/komad... Ajd sliku jedne pa da odem i uporedim čim otvore.

Ne tugujem, a i nije navoj Navoj je sa strane filtera, na aparatu ima specijalni prihvat koji je u originalu zaštićen/sakriven prstenom pa se ni ne vidi dok prsten ne skineš. Zat i mora specijalni adapter da se kupi. Neka ga, naručeno, biće...