-
Broj sadržaja
1 -
Na DiyAudio.rs od
-
Poslednja poseta
Content Type
Profiles
Forum
Blog
Kalendar
Postovi objavljeno od khachai44
-
Trenutno na sajtu 12 članova, 2 Skrivenih, 22 Gosta (Pogledaj celu listu)
-
Forumska statistika
8.9k
Ukupan broj tema435.1k
Ukupan broj objava -
Statistika članovȃ
Connect interface line out to Stage box
in Digital
Napisano
I'd like to connect RME UCX line out to PA.
The mixer is far away so I have to connect to stage box which has XLR inputs that go to Mixer Mic input.
RME UCX line out specs:
• Output: 6.3 mm TRS jack, servo-balanced
• Output impedance: 75 Ohm
• Output level switchable Hi Gain, +4 dBu, -10 dBV
• Output level at 0 dBFS @ Hi Gain: +19 dBu
• Output level at 0 dBFS @ +4 dBu: +13 dBu
• Output level at 0 dBFS @ -10 dBV: +2 dBV
I am not sure about the PA Mixer specs or even if it has Pad on inputs.
I am sending full stereo mix, so don't want any artifacts like tonal shifts or loss of dynamics.
What is the best way to connect this ?
Is simply lowering output level going to work ?
Do I need a DI Box ?