Jump to content

Koji 24bit DAC? (split iz SissySIT)


shonne

Preporučeni Komentari

43 minutes ago, NIXIE said:

To  nije 24 bita.

Zato ovo jeste

https://tascam.com/us/product/da-3000/top

Oko 1000$ 

Na ovo mogu sve ploče da nasnimim u DSD (jer je digitalni trakaš)

Specifications:

Stereo recording to SDHC card or CF card

PCM recording format: BWF(44.1/48/88.2/96/176.4/192kHz, 16/24bit)

DSD recording format: DSDIFF/DSF (2.8/5.6MHz)

SD card slot (supports 4 to 32GB SDHC cards)

CF card slot (supports UDMA)

WAV file playback

Cascade function enables simultaneous operation of multiple units

Recording 2 mono files from stereo input possible

Mark functions can be used set up to 99 points per file (mark information can be used in software that supports BWF format)

When recording, designation of the recording file folder possible

Synchronized recording using level, stop time and recording start delay time setting

Input level can be adjusted in 0.5dB step

Using automatic track incrementing function, new files can be created automatically while continuing to record when a condition (level, file size, digital input) set in advance occurs

Manual track incrementing function can be used whenever you like to create a new track while continuing to record

Automatic mark functions can be used to easily check problems (levels, word clock unlocking) detected during recording

File name format can be set to either a user-defined word or the date and time

Repeat playback function (all files or single file)

Folder playback function can be used to play all files in a folder

Playlist function allows files to be programmed in advance for playback

Divide and delete functions can be used to manage files that are already recorded

UNDO function can be used to cancel the previous operation

USB host port supports copying between USB flash drives and CF/SDHC cards

File names can be changed

Direct location possible when a USB keyboard is connected

Word clock master can be set to Internal, Word input or Digital inputs

Analog input and output reference levels can be set to -9/-14/-16/-18/-20dBFS

Digital input has a sampling rate converter (supports 32 to 216 kHz)

Audio files prepared on a computer can be played back (if in a format supported for playback by this unit)

Oscillator function (440 Hz, 1 kHz, 10 kHz)

Input monitoring function allows input signals to be output without recording

Updating is possible

EI core transformer used in power supply section

Dual mono circuits eliminate interference between left and right channels

Fully-balanced circuits realize low noise

128x64 OEL display with a wide viewing angle

24-dot stereo LED level meters with adjustable brightness make checking levels easy

TCXO with 1ppm precision

Backup memory stores settings even when the power is off

Fanless design eliminates unwanted noise

Aluminum front panel harmonizes with other studio equipment designs

Operation possible using included RC-10 wireless remote control

Standard 1/4" headphones jack provides 45mW/ch output

USB port for USB keyboard (supports USB 1.1)

USB port for USB flash drive (supports USB 2.0)

XLR digital input/output (supports AES3-2003 and IEC60958-4:AES/EBU formats)

RCA Coaxial digital input/output (supports IEC60958-3:S/P DIF format)

BNC digital input/output for DSD (supports SDIF-3 and DSD-raw formats)

RCA analog unbalanced input/output

XLR analog balanced input/output

EIA 1U rackmount size

RoHS compliant

da-3000_p_front.jpg

Kupiš profi stvar i ćao. :D

Link to comment
Podeli na ovim sajtovima

 

Quote

 it's close enough to the analog source to confuse me as to which is which. You sit on the couch, stroking your beard, musing that what looks like and prices out for the Pro Audio market, is really anything but.

There is little on the DIY or Pro forums about modifying the unit. The DECware mod addresses just the DAC section. Lampizator tried converting the DA-3000 ADC section to tubes, but doesn't appear to have productized the modifications. In any case, the above mods are within the reach of anyone with good soldering skills and a spare afternoon.
 

https://www.audioasylum.com/cgi/vt.mpl?f=vinyl&m=1163057

Link to comment
Podeli na ovim sajtovima

7 minutes ago, Mikorist said:

Ja bih ipak preskočio transport. Motor, laser i vrtenje CD...

Mrzi me da ubacujem diskove. Onda preskakanje diskova. 

Treba jednom u 2 godine da se narezuje ponovo kolekcija. Jebo ja to. :D

Umesto transporta neki SSD.

 

Nekad slušam diskove preko DVD transporta, a nekad fajlove sa PC. Kako kad, slično je , malo je bolje sa PC.

Link to comment
Podeli na ovim sajtovima

2 hours ago, NIXIE said:

Nema. :)

Ovaj moj primerak CD 3 nije isao, niti je bio u planu da ide do Lampizatora, niti da mu se rade bilo kakve kerefeke sa gornjeg linka.

Za razliku od toga, primerak koji je u mom posedu od 1990 god. je imao srece da gostuje kod Vraca iz Baca, tamo pregledan, pretresen i tvikovan. Posle povratka u moj sistem je smestio na klupu za rezervne igrace Audial The Model DAC, kao i Shiga klon.

Eno obe djunte, odlozene na suvo, tamno mesto iliti orman. Sto ono kazu - 'leba ne jedu. :laugh1tooht:

A CD 3 ima ponovo funkciju usviravanja audio sistema nekih dobrih 50 min. i to je max. Posle toga, narafski, idu vinili.

Naravno, umesto CD 3, moze da tih prvih 50 min. odradi i A 76.

Zakljucak : hvala @Zen Mod na rejuvenaciji i novom zivotu koji si udahnuo mojem voljenom CD plejeru. :worship:

 

Link to comment
Podeli na ovim sajtovima

Ja sve što više gledam - meni to sve isto. I to u rasponu od 150 do 900 evra

Isti ili slični čipovi. Isti izlazi sa opampovima. Slična merenja na audiosciencereview.com

Koji god da uzmeš isti đavo. U analognom delu nisu diskretne komponente....

Link to comment
Podeli na ovim sajtovima

15 minutes ago, Mikorist said:

Ovog ima 3 verzije najskuplja verzija ima otpornike sa tolerancijom 0.012%/ wtf ?:smesna:

https://www.ebay.com/itm/272720952901

 

Link to comment
Podeli na ovim sajtovima

Aha, nisu samo otpornici - i drugi je opamp u naj varijanti

Description:

The latest version of the stock Rev 4.0!
     Firmware version V1.06!
     Support DSD256!
     Rev 4.0 version to keep up with the last version is to change the output buffer part;
     The op amp LME49710 and LME49724 were changed to OPA1602;
     There are 2 specifications, 0.012% and 0.05%

Link to comment
Podeli na ovim sajtovima

Kreiraj nalog ili se prijavi da daš komentar

Potrebno je da budeš član DiyAudio.rs-a da bi ostavio komentar

Kreiraj nalog

Prijavite se za novi nalog na DiyAudio.rs zajednici. Jednostavno je!

Registruj novi nalog

Prijavi se

Već imaš nalog? Prijavi se ovde

Prijavi se odmah
  • Članovi koji sada čitaju   0 članova

    • Nema registrovanih članova koji gledaju ovu stranicu
×
×
  • Kreiraj novo...